Acoustic Revive RTP-Final Ultimate Power Tap

If you’re chasing a quieter background, better micro-detail, and more stable dynamics, the power distribution block is a critical upgrade point—especially in high-resolution systems with multiple source components, DACs, servers/streamers, and amplifiers. The RTP-Final series is engineered to raise perceived performance by combining noise elimination, anti-static control, and mechanical vibration management, while keeping the design philosophy of “no energy loss, no added character.” Acoustic Revive explicitly positions RTP-Final as delivering a wide-range S/N improvement without the typical trade-offs associated with regenerated power supplies, noise-cut transformers, or choke/filter-based devices.

CS-3K noise elimination on power + ground

A key “Final” upgrade is the addition of the CS-3K noise-elimination function, designed to eliminate high-frequency noise on the AC line. RTP-Final extends this concept by also applying it to the ground line, targeting HF noise that can ride on ground and contaminate the audio system’s reference.

Mineral noise absorption + anti-static materials (upgraded)

Inside the milled A2017S chassis, RTP-Final continues Acoustic Revive’s mineral-compound strategy—using green carborundum + lithia tourmaline powder for noise absorption and static prevention, then upgrading the mix by adding Kiyoh-stone and other mineral powders to further strengthen noise reduction and anti-static performance.

Vibration control: upgraded feet and insulators

RTP-Final upgrades the feet construction from chrome-plated brass + damping sheet to gold-plated machined brass combined with a new Kiyoh-stone impregnated silicone insulator (derived as a compact version of the RKI concept). This is intended to absorb and dissipate vibration from the floor more effectively—important because mechanical vibration can influence electrical contact stability and perceived noise.

NCF + pure copper receptacles and inlet, plus PC-TripleC internal wiring

For the receptacles and inlet, RTP-Final uses NCF resin (co-developed with Furutech, described as non-static) together with pure copper electrodes aimed at extremely high conductivity. Internally, the wiring is specified as PC-TripleC thick oval single-core with silk + Teflon insulation chosen for very low dielectric properties.

Choosing your model: RTP-2Final vs RTP-4Final vs RTP-6Final

All RTP-Final models share the same core technologies; the difference is outlet count and chassis size/weight. RTP-2Final is compact for minimal systems; RTP-4Final suits typical front-end + amp rigs; RTP-6Final is for larger multi-component systems. Outlet configurations correspond to the model number (2 / 4 / 6 outlets).

Technical Specification

Series: Acoustic Revive RTP-Final “Power Box”
Noise elimination: CS-3K noise-elimination function on power line + ground line
Chassis: Milled A2017S aerospace-grade aluminum alloy
Internal noise/anti-static compounds: Green carborundum + lithia tourmaline powder, plus added Kiyoh-stone and other mineral powders
Feet/insulation: Gold-plated machined brass + Kiyoh-stone impregnated silicone insulator
Receptacles & inlet: Furutech co-developed NCF resin + pure copper electrodes
Internal wiring: PC-TripleC thick oval single-core, silk + Teflon insulation

Model Variants

• RTP-2Final (2 outlets)

  • Dimensions: W88 × H70 × D148 mm

  • Weight: approx. 1.5 kg

  • MSRP (Japan): ¥300,000 (tax excl.)

• RTP-4Final (4 outlets)

  • Dimensions: W88 × H70 × D265 mm

  • Weight: approx. 2.5 kg

  • MSRP (Japan): ¥350,000 (tax excl.)

• RTP-6Final (6 outlets)

  • Dimensions: W140 × H70 × D233 mm

  • Weight: approx. 4.0 kg

  • MSRP (Japan): ¥400,000 (tax excl.)

Advanced Noise Reduction Technology from the CS‑3K Outlet Stabilizer
The RTP‑Final now incorporates the renowned noise reduction circuitry from the award‑winning CS‑3K Outlet Stabilizer.
This advanced system eliminates high‑frequency noise carried on the power line, delivering a dramatic improvement in signal‑to‑noise ratio.
Unlike conventional designs, the RTP‑Final extends this technology to both the power and ground lines, ensuring complete removal of high‑frequency noise from every stage of your system’s power supply.

Enhanced Chassis Noise Control and Static Protection
Precision‑machined from aerospace‑grade A2017S aluminum, the RTP‑Final’s chassis houses a carefully engineered noise‑control matrix. A blend of green carborundum and lithium tourmaline powder absorbs power and ground noise while simultaneously suppressing static buildup.
For the latest generation, we have further reinforced these properties by adding Kiyoseki — a rare mineral famous for its world‑leading negative ion generation — together with selected mineral powders. The result is even greater noise suppression and superior static protection, elevating your system’s performance to unprecedented levels.

Upgraded Vibration‑Damping Feet
The RTP‑Final now features a significant upgrade in its vibration‑control system. Replacing the conventional chrome‑plated brass with damping sheet, the new design employs precision‑machined, gold‑plated brass feet coupled with advanced silicone insulators infused with Kiyoseki mineral.
This innovative insulator technology, derived from the acclaimed RKI‑5005 and refined into the more compact RKI‑1803 model, is capable of absorbing and dissipating floor‑borne vibrations with exceptional effectiveness. The result is a cleaner, more stable foundation that preserves musical detail and resolution at the highest level.

Superior Outlets and Inlets – NCF Resin with 100% Pure Copper Contacts
The RTP‑Final continues to employ premium outlets and inlets designed in collaboration with Furutech. Each receptacle is crafted from Furutech’s exclusive NCF resin, which eliminates static build‑up, and fitted with electrodes made of pure copper — delivering a full 100% conductivity.
By comparison, even the finest audio‑grade or hospital‑grade outlets that use tellurium copper or beryllium copper electrodes achieve only around 50% of this conductivity. The difference is unmistakable: pure copper provides a direct, uncolored, and highly efficient current path that no alloy can match.

Uncompromising Internal Wiring
Inside the RTP‑Final, every detail is designed for ultimate purity of power delivery. The unit employs oversized elliptical PC‑TripleC single‑core conductors (2.8 × 2.4 mm), insulated with a proprietary silk‑Teflon composite. With a conductivity rating of 101.5% I.A.C.S, PC‑TripleC offers unmatched signal transfer, while the low‑dielectric silk (2.1) and Teflon (2.2) insulation preserves every nuance of the current with absolute integrity.

Beyond Power Conditioners and Transformers
The RTP‑Final achieves results that far surpass conventional clean power supplies, isolation transformers, or even custom audio power installations.
Unlike AC regenerators, which inevitably introduce noise of their own, or noise‑cut transformers, which reduce noise at the cost of narrowing the frequency response, the RTP‑Final maintains the full energy and dynamics of your system.
And while filter‑based power conditioners often dull the music with energy loss and coloration, the RTP‑Final delivers an unprecedented improvement in signal‑to‑noise ratio and ultra‑wide bandwidth — without robbing the sound of life. With the RTP‑Final, there is no need for costly and invasive power supply modifications.